| System | Type |
| CLR1010/CLH6020 | General purpose, Rigid, Low shrinkage epoxy for potting or casting |
| CLR1030/CLH6450 | 105°C operating. General purpose potting casting electronic, electrical components. 4:1 Mix. |
| CLR1066/CLH6520 | 120°C operating, Low viscosity, Long pot life epoxy, shock resistant, machine dispense, larger masses. |
| CLR1066/CLH6590 | 125°C operating, Low viscosity, Suitable for auto dispense, Machinable after cure. |
| CLR1066/CLH6930 | 130°C Operating. Large mass casting, 30-minute pot life. Masses larger than 6lbs. |
| CLR1066/CLH6330 | 125°C Operating, 1Hr pot life, Low Exotherm, Low shrinkageepoxy. |
| CLR1066/CLH6710 | 105°C Operating. Epoxy for large mass casting, 3Hr pot life, Flexible. |
| CLR1183/CLH6560 | 130°C Operating, 80 Minute pot life, Shock resistant, General purpose epoxy. |
| CLR1376/CLH6930 | 130°C Operating. Low Exotherm, low shrinkage, excellent shock resistance. |
| CLR1476/CLH6730 | Low viscosity epoxy, Suitable for machine dispense, Pot/Cast electronic switches. |
| CLR1556/CLH6510 | Low mixed viscosity, Good thermal cycling, 2:1 mix by volume, electrical and electronics. |
| CLR1556/CLH6520 | Soft 50/40D, Slow gel - Electronic Modules, Machinable. |
| CLR1556/CLH6640 | General Purpose, 60 minute pot life, Excellent Thermal Cycling. |
| CLR1583/CLH6229 | 130°C Operating, Room temp cure, Excellent for potting thermostats and sensors. |
| CLR1710/CLH6710 | 1:1 Mix Ratio, Long Pot life, General purpose, Low Cost. |
