Electronic Circuits and Components

ISO 9001:2015 Certified

澳洲幸运10开奖计划

澳洲幸运10官方网址

* HC: Heat Cure / RT: Room Temperature Cure				Handling
	Cure*	Description	Benefits	Color	Mix Ratio pbw	Mixed Viscosity (@ RT unless noted)	Gel Time (@ RT unless noted)	Hardness (Shore)
CLR1180/CLH6520	RT	Electronic potting, impregnating	Lowest viscosity semi-flexible convenient ratio	Drk Amber	100 : 100	750	2 Hrs.	70 D
CLR1556/CLH6520	RT	Transformer potting	2:1 mix by vol. filled, good thermal cycling	Black	100 ; 30	3,000	8 Hrs.	55 D
CLR3517/CLH6230	RT	Thermal cycle transformer casting	Semi-flexible, filled, good thermal cycling, casting	Red	100 ; 10	3,250	90 min at 60 c.	82 D
CLR1876/CLH6020	RT	Thermally conductive potting / cast	Thermally Conductive filled casting	Black	100 ; 3	37,500	45 min.	90 D
XR61406/CLH6020	RT	Low density potting / casting	Low Density casting 0.74 specific gravity	Grey	100 ; 12	2,000	45 min.	70 D
CLR1946/CLH6500	RT	General purpose potting, casting	Convenient mix, economical, filled, casting	Black	100 ; 100	7,500	2.5 Hrs.	65 D
XRD1018/XHD1019	RT	General purpose flame out pot/cast	Easy mix, economical, filled, meets UL94-V0	Black	100 ; 100	7,500	75 min.	65 D
XRD1116/XHD1117	RT	Small motor and ballast potting	Ballast potting, passes UL 94-V1	Grey	100 ; 50	9,000	25 min.	87 D
CLR1821/CLH6441	RT	UL listed electronic potting casting	UL 94-V1 Yellow card, potting and casting	Grey	100; 100	20,000	45 min.	87 D
CLR1331/CLH6010	RT	Electrical insulator casting	Casting low voltage bushings and insulators	Grey	100 ; 7.5	4,500 at 70 c.	6 min. at 70 c.	91 D
XR52092/XH62093	RT	Thixotropic epoxy sealant	Sealing ends of large electrical laminations	Grey	100 ; 100	35,000	35 min.	85 D
CLR1837/CLH5185	HC	Electrical insulator casting	Cast lg bushings, insulators and power transformers	Red	100; 30	6,000 at 60 c.	30 min. at 125 c.	90 D
CLR1329/CLH5100	HC	Outdoor electrical casting	Outdoor heat cure large mass casting	Grey	100 ; 23	500 at 60 c.	24 min. at 100 c.	90 D
CLR1190/CLH5185	HC	Dipping / impregnating system	155c. operating low stress impregnating	Amber	100 ; 100	2,000	45 min. at 125 c.	86 D
CLR1157/CLH5185	HC	Transformer potting / casting	155c. operating low stress, tough, filled	Red	100 ; 30	1,500 at 50 c.	40 min. at 125 c.	88 D
CLR1331/CLH5185	HC	Transformer potting / casting	155c. low stress, semi-rigid filled	Grey	100 ; 30	2,000 at 60 c.	30 min. at 125 c.	90 D
CLR1190/CLH5515	HC	Dipping / impregnating system	155c. operating increase flexibility over CLH 5185	Amber	100 ; 150	2,250 at 60 c.	2 hrs. at 100 c.	70 D
CLR1157/CLH5515	HC	Transformer potting / casting	155c. operating increase flexibility over CLH 5185	Red	100 ; 50	2,250 at 65 c.	40 min. at 125 c.	70 D
CLR1331/CLH5515	HC	Transformer potting / casting	180c. operating increased flexibilty over CLH 5185	Grey	100 ; 50	4,000 at 65 c.	40 min. at 125 c.	82 D
CLR1190/CLH5166	HC	Dipping / impregnating system	180c. operating dipping, coil impregnation	Amber	100 ; 80	650	2 hrs. at 100 c.	85 D
CLS9600	HC	Dipping / impregnating one comp.	220c. operating one component coil impregnation	Drk Amber	***	1,100	25 min. at 125 c.	85 D
CLS9616	HC	Low stress ferrite potting one comp.	155c. operating low stress, ferrite potting	Black	***	16,000	90 min. at 100 c.	70 D

澳洲幸运10开奖号码记录

* HC: Heat Cure / RT: Room Temperature Cure				Handling
	Cure*	Description	Benefits	Color	Mix Ratio pbw	Mixed Viscosity (@ RT unless noted)	Gel Time (@t RT unless noted)	Hardness (Shore)
CLP7469/CLI4161	RT	Transformer potting / casting	General purpose, economical, passes UL 94-V0	Black	100 ; 16	4,000	1 Hr.	60 D
XP61862/CLI4161	RT	Electronics and capacitor potting	UL 94-V0 Yellow card, fast cure, 5:1 pbv mix	Black	100 ; 16	4,000	4.5 min.	93 A
CLP7106/CLI4010	RT	UL 94-V0 motor and electronic pot	UL 94-V0 Yellow card, 1:1 pbv mix	Black	100 ; 109	4,000	20 min.	90 A
XPD1278/CLI4161	RT	Electronic potting / casting	Economical fast setting	Black	100 ; 20	4,000	9 min.	48 D